My DPO has some weird behavior with the mod bus, I can't wrap my head around how VCO A is normaled to Shape and Fold.
Ex: I'd like to add some movement to the SHAPE param but nothing happen, the final out is unaffected by the mod bus with this settings:
- Mod Blus full CW (100%)
- Shape full CCW (0%)
- Shape CV full CW (100%)
But if I connect the VCO A SINE to the Shape input, the modulation works as expected (by me![:lol:]( "lol")
)
If I turn up the SHAPE param I hear the modulation from the MOD BUS, but like if the value I set it's the maximum value reachable by the mod.
It's nearly the same with the FOLD parameter, with the FOLD at 0 and his attenuator fully CW I can hear the fold opening by maybe 10%.
Here is a video for reference: https://drive.google.com/file/d/1UsSX1P ... sp=sharing
Ex: I'd like to add some movement to the SHAPE param but nothing happen, the final out is unaffected by the mod bus with this settings:
- Mod Blus full CW (100%)
- Shape full CCW (0%)
- Shape CV full CW (100%)
But if I connect the VCO A SINE to the Shape input, the modulation works as expected (by me
)If I turn up the SHAPE param I hear the modulation from the MOD BUS, but like if the value I set it's the maximum value reachable by the mod.
It's nearly the same with the FOLD parameter, with the FOLD at 0 and his attenuator fully CW I can hear the fold opening by maybe 10%.
Here is a video for reference: https://drive.google.com/file/d/1UsSX1P ... sp=sharing
Statistics: Posted by abozzelli — Sat Jan 11, 2025 6:01 pm