I agree here, you can use external but the entire point of this module is to reduce and simplify those external needsnot really, but I had a different application in mind, where each step on the slowquencer is just a few clock ticks. Then you might have 4 stages with: 6 clocks steps, 8 steps, 7 steps, and 12, and you still want to reset the whole sequence after e.g. 64 steps. So that you can change the lengthof the invididual stages as you want, but always stay in a 64 step (4 bar) pattern.Would the CYCLE output on the Gates expander work for that reset?- It also needs a reset output with a selectable number of steps (to reset the sequenced sequencer after a fixed number of steps).
(of course, this can be realized externally with a clock divider)
For me would even work better if the whole thing works on a selectable length and then the knobs just move in imaginary “dividing” line within that full length, if that makes sense…
Statistics: Posted by damase — Sun May 05, 2024 1:23 pm